Hengyong International Group Limited


 To be the best CNC gear machine supplier in China, 

      providing professional service worldwide.

Sales & Support
Request A Quote - Email
Select Language
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsGear Lapping Machine

3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA

Good quality CNC Gear Cutting Machines for sales
Good quality CNC Gear Cutting Machines for sales
It’s really good to work with them,other than quality product,they always give out some amazing ideas,which surprise me a lot.

—— Kelly

I'm Online Chat Now

3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA

China 3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA supplier

Large Image :  3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA

Product Details:

Place of Origin: CHINA
Brand Name: JJR
Certification: ISO9000
Model Number: YKD2550

Payment & Shipping Terms:

Minimum Order Quantity: 1set
Packaging Details: in wooden cases
Delivery Time: 1month
Payment Terms: T-T , L/C
Supply Ability: 50sets/month
Detailed Product Description
Maximum Diameter Of Driven Gear: 500mm Maximum Diameter Of Driving Gear: 250mm
Maximum Offset: ±76mm Diameter Of Spindle Hole At Large End: 60mm
Taper: 1:20 Taper Depth: 80mm
Diameter Of Through Hole: 92.5mm Braking Moment: 2.5~25nm
Main Driving Motor: 5.5, 0~3000kw,rpm Total Power Of Motors: 18.25kva

3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm , Total Power 18.25KVA


Quick Details:


This machine is a CNC bevel gear lapper designed mainly for lapping in pairs all kinds of bevel gears., especially for bevel gears manufactured by batch and mass productions used in automobile, passenger car, tractor, ship building and machine tool industries.
Along with the continuous development of the automobile industry, the application of the lapping technique becomes wider and wider. This machine is used for the high-speed and accurate lapping of spiral bevel gears and hypoid gears to increase the surface finish of the tooth flanks, to correct properly the tooth distortions produced after heat treatment and to modify the positions and size of the tooth bearings in order to attain to the goals of smooth transmission and lower noise.   





1.The driving shaft is mounted vertically and the force directs against the machine bed to increase the driving rigidity.   
2. E, P and G (X, Y, Z) three axial additional lapping motions are adopted and concentrated upon the driven shaft.  The machine structure is compact, and motions are made by lead screws driven by three servo motors and controlled by the NC system. Together with the driving shaft, simultaneous movement of three axes and various lapping cycles are possible.
3.The driving shaft is driven by a servo motor of great torque, and the maximum speed is up to 3000 rpm and can be adjusted freely. Meanwhile, frequent rotations and reverse rotations can be made to lap the drive sides and the coast sides of the gear teeth. The hydraulic motor drives the driven shaft and the braking moment is controlled by an electro hydraulic proportional control valve. This solution is both up to date and reliable, and the adjustments are convenient.
4. The angle of the lapping compound swivel rod is adjustable, which has two adjustable nozzles. One is for the drive sides and other is for the coast sides.
5.The MITSUBISHI M64 CNC control system and servo system are equipped on this machine. A 5.5 kw, 0-3000 rpm servo motor is used as the main drive and the E and P (X, Y) motions are driven by 1 kw, 2000 rpm motors. The G(Z) motion is driven by a 1.5kw, 2000 rpm servo motor and the relative servo unit. The main drive motor can be regulated steplessly and changes over between rotations and reverse rotations every 20 seconds to 1 minute. The swiveling amounts of E, P and G (X, Y, Z) three axes are adjustable and the three axes can move simultaneously. All the four lapping cycles (standard, center, trimming and periphery)will be controlled by the machining programs. All the buttons for the operation and adjustment necessary for the lapping cycles are mounted on the control panel and the button station. The E, P and G (X, Y, Z) coordinate values of the driving shaft and the driven shaft can be displayed on the screen.
6.The braking moment of the driven shaft is controlled by the electrohydraulic proportional control valve mounted on the hydraulic system. The moment can be adjustable in the range from 2.5-25NM, and a torque displaying device is available. The hydraulic motor has the braking and shedding functions, and pressures for braking and shedding are set to 2.0Mpa and 7.0Mpa respectively. Clamping and unclamping of workpieces on the driving and driven shafts, the advance and withdrawal of the driven stock, clamping and unclamping of the driven stock and the cross slide, swiveling in and out of the lapping compound rod, and the opening and closing of the enclosure can be done through different hydraulic cylinders. The hydraulic oil is cooled by an independent cooling system.
7.The air sealing of the driving and driven shafts, the blowing for cleaning the arbor of the driven gear, the pneumatic position detection of the driven stock, the pneumatic position detection of the lapping compound rod to the up position and control of opening and closing of the right and left lapping compound nozzles will be conducted by the pneumatic system.
8.The machine has an independent system to heat, mix and supply the lapping compound.
9.A safety enclosure is equipped on the machine.
10.An air conditioner can be equipped for the independent sealed electrical cabinet.





Maximum Diameter of Driven Gear



Maximum Diameter of Driving Gear



Maximum Offset



Distance from Spindle Axis of Driving Stock to Spindle of Nose of Driven Stock



Distance from Spindle axis of Driven Stock to Spindle Nose of Driving Stock



Driving Spindle

Diameter of Spindle Hole at Large End






Taper Depth



Diameter of through Hole



Driven Spindle



Diameter of Spindle Hole at Large End






Taper Depth



Diameter of Through Hole



Braking Moment



Main Driving Motor


5.5, 0~3000

Power Supply    


60A   380V   50HZ

Compressed Air

Rated Flow Rate






Total Power of Motors



Overall Dimensions (L X W X H)



Net Wight




Note:The specifications will be adjusted at any time, due to the continuous development of our product.


3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA3 Axis CNC Spiral Bevel Gear Lapping Machine , Gear Daimeter 500mm, Total Power 18.25KVA

Contact Details
Hengyong International Group Limited

Contact Person: Mr. Da Yong Sun

Tel: 86-022-87770668

Fax: 86-022-87770669

Send your inquiry directly to us (0 / 3000)